Follow

Cashino PTP-II Mobile Printer

In this article, we will cover some basic tasks required to work with the Cashino PTP-II mobile printer, which uses 58mm rolls and operates via Bluetooth.

SK cashino (2).png

Loading the Paper Roll

We recommend ordering paper rolls from us, as we offer only high-quality German-made thermal paper. Open the Cashino printer by pressing the sides of the cover and insert the roll inside the printer, ensuring the paper unrolls upwards, as shown in the image.

Tip: Use high-quality thermal paper (you can order them through our sales department; contact information can be found here).

papír cashino SK.png

Pairing the Printer with Your Tablet

  1. Plug the printer into a power outlet and turn it on.

  2. On your Android tablet (gear icon), open the Bluetooth / Connected devices section and make sure Bluetooth is enabled.

  3. Click on Pair new device and pair the PTP-II.

  4. When prompted, enter the PIN code – for this printer model, the code is 0000.

  5. Once paired successfully, the PTP-II device will move from the list of available devices to the list of paired devices.

ENG-cashino.jpg

POS Check and Test Print

  1. Open the Storyous app on your tablet.

  2. Open the Menu using the ≡ icon in the top-left corner and select Settings > Printers.

  3. Choose your printer and ensure it is Online. 

    • If it shows as Offline, verify that the Printer Address matches the BDA value printed on the self-test. Instructions for printing the self-test can be found below.

    • If necessary, correct it by clicking the Printer Address field.

  4. If you modify the address, you must log out and log back in to apply the change.

  5. Then click Test Print.

  6. The printer will print the message: “Your device is working properly.”

ENG-BT.gif

Self-test

The self-test is a printout containing technical information about your device. To print it, follow these steps:

  1. Turn off the printer by holding the Power button.

  2. Press and hold both the Power and Feed buttons at the same time.

  3. The device will print a ticket with technical details. Look for the printer’s physical address labeled BDA. 

selft-test cahsino.png

Note: In the cash register application, the BDA - Bluetooth address must be entered with colons, for example: 00:02:0A:06:82:52.

Diagnostics

On your printer, you will find two LED indicators – red and blue.

  • Red Indicator:

    • If the red indicator is on continuously, the device is powered on.

    • If it blinks, the printer is on but inactive (idle).

  • Blue Indicator:

    • It blinks quickly while charging.

    • It blinks slowly when the battery is low.

    • It stays on continuously when the device is fully charged, and you can disconnect it from the charger.

  • Both indicators blinking simultaneously:

    • If both indicators are blinking, the printer is reporting a paper shortage.